 |
| The Lake Mower™ is built to last, comes with a one year warranty, and will give you years of service. This weed cutting
machine makes it easy to control lake weeds (commonly referred to as algae or seaweed) affecting your waterfront.
|
|
"To anyone who has had to endure the labor intensive battle of vegetation
around your boat dock, the Jenson Lake Mower™ is like a gift from heaven. Now,
for no more than one hour of my time per month I am able to keep my
seventy-foot dock clear of growth. Actually, I now look forward to
this task - it's fun."
Samuel C. Jones, Star Lake, MN
|
|
"I cut 3 acres in 10 hours with the Lake Mower™. Everybody on the lake
is just so pleased with their machine."
Vic Hannon, Camden, S.C.
|
|
Four foot wide cutter. Super sharp blades.
|
Great Features!
- Assembly with the enclosed 1/8" Allen wrench is quick and easy.
- Quick disconnect allows easy "fold-up" for compact storage or easy transportation.
- Special low power consumption, high efficiency motors.
- Up to 7 hours of operation per charge for the HD5000; 10 hours for the RG2500.
- Light-weight design: Weighs between 42 and 51 pounds.
- Robust aluminum and stainless steel construction, for long life.
- Self-sharpening cutting blades are made of heavy duty specialty steel.
- Adjustable mounting bracket fits the Lake Mower™ to the side, transom, or front of almost any small boat.
- Tiller handle with safety on/off switch (height adjustable).
- Custom bearing blocks, promoting smooth operation.
- Depth-stop collar adjusts for varying depths, from 0 to 3 feet. Optional 2' and 4' extenders are available.
- Compact drive system.
- Warranty is NOT voided when used commercially (except for rentals).
- Easy and fun to operate.
- The RG2500 Lake Mower™ easily cuts through submerged weeds such as eurasian milfoil,
hydrilla, elodea, and tape grass.
- For cattails, bulrushes, and dense lily pads we suggest the HD5000 Lake Mower™
|
|
"...We are on a small bay which was being overtaken by non-native lilies which someone planted several years ago.
Your mower is helping us to keep them from totally destroying our bay and perhaps get it back to the quality it used to be."
Jerry Kolpek, MN
|
|
| Cutting width: |
4 feet |
| Cutting depth: |
Down to 3 feet (+/-) below water surface (adjustable). Down to 5 or 7 feet (+/-) with optional 2 ft or 4 ft extenders |
Number of blades
Upper Bar:
Lower Bar:
|
15
16 |
| Height: |
RG2500: 58"
HD5000: 68" |
| Width: |
48" |
| Weight: |
RG2500: 42 lb
HD5000: 45 lb
4' Extender: 6 lb
2' Extender: 3 lb |
| Box dimensions: |
53" x 11" x 7" |
Motor Specifications:
|
- Heavy duty, 100% continuous duty rated gearmotors, 1/10 or 1/5 horsepower. Steel gears.
- 12 Volt DC. Fuse protected: 30 Amp fuses for the HD5000; 20 Amp fuses for the RG2500. Suitable for prolonged cutting.
|
Power Source:
|
- 12 Volt deep cycle marine battery (not included).
- Available cutting time per charge: typically 7 to 10 hours.
|
Adjustments:
|
- Vertical up/down, for deeper or shallower cut.
- Swing through 90° on mounting bracket (vertical to horizontal position) to swing blades out of water, or to cut at an angle.
- Rotate 360° in horizontal plane, to cut forward, backward or sideways.
|
|
Since we are continuously striving to improve our products, we reserve the right to update these specifications without notice.
|
|
|
|
Contact Information
Jenson Technologies
Development Corporation
412 Summer Mt. Dr.
San Marcos, Texas 78666
Phone:
(512) 393-5073
Toll Free:
(888) 298-LAKE
Fax:
(512) 393-5074
E-mail:
info@lakemower.com
|
|
